This document, and the content contained herein, is intended for customers, users and other persons with the operation and features of the covered Hegla products. While Hegla makes every effort to include accurate and useful information, it is not possible to anticipate or address every possible situation or to account for conditions at unknown locations or interactions with unknown systems or components. Therefor, these documents must be used only for informational purposes and used in conjunction with best practices and with due care. Hegla shall not be responsible for any injuries or losses that occur as a result of the information in this document. Moreover, as products and offerings change over time, the usefulness of the information in this document may become obsolete. It is the responsibility of the reader or consumer to ensure that the information contained herein is timely and reflects the current reality of Hegla products and offerings. Hegla disclaims any and all warranties regarding the information in this document.

***Read chapter 1 of your operators manual before undertaking any work in the area of the storage system equipment.***

Click here to view disclaimer

When in doubt please contact Hegla service before taking action (404) 763-9700

Panelview Plus 400 Password Procedure

Document Scope: HEGLA RapidStorage machines with Allen Bradley PanelView Plus 400

1) Press the F7 button for Login
2) Press the F2 button to enter a username.
3) Using the Selector Arrows and the Entry Key, enter the all-lowercase username “hegla” or "1"
4) When finished entering the letters, use the Enter Key to enter the username
5) Press the F3 button to enter a password.
6) Using the Selector Arrows, select “Shift” on the on-screen keypad to enable uppercase.
7) Using the Selector Arrows, enter the uppercase letter “D”
8) Using the Numerical Pad, enter the number “37688” or "0100"
9) Use the Enter Key to enter the password
10) Press the Enter Key again to log in as the maintenance user.
11) You may now use the maintenance functions located in “SERVICE F4”