886
This document, and the content contained herein, is intended for customers, users and other persons with the operation and features of the covered Hegla products. While Hegla makes every effort to include accurate and useful information, it is not possible to anticipate or address every possible situation or to account for conditions at unknown locations or interactions with unknown systems or components. Therefor, these documents must be used only for informational purposes and used in conjunction with best practices and with due care. Hegla shall not be responsible for any injuries or losses that occur as a result of the information in this document. Moreover, as products and offerings change over time, the usefulness of the information in this document may become obsolete. It is the responsibility of the reader or consumer to ensure that the information contained herein is timely and reflects the current reality of Hegla products and offerings. Hegla disclaims any and all warranties regarding the information in this document.
***Read chapter 1 of your operators manual before undertaking any work in the area of the linear drives equipment.***
When in doubt please contact Hegla service before taking action (404) 763-9700
How to release a high speed gantry
To release the gantry so you can move manually without any safety zones you must do the following:
- Go to the gantry panelview and click the service softkey as shown below.
- Now click the login soft key as shown below.
- Once you clicked service a pop up window will appear. Try the following usernames and passwords:
| Username: | Hegla |
| Password: | D37688 |
| Username: | 1 |
| Password: | 0100 |
- Once you are logged in your screen should look like the one shown below. Then click the system soft key.
- After clicking system, select "Set Zero P." You should then see the screen below. Click the release soft key and the red box under "release bridge/trolley" will turn green. The gantry is now in a released state and can be manually moved back to home position or any other position via the panelview or the remote.
**Warning-Gantry has no safety zones when released. If not used carefully serious injury or death could occur!**
